Learning guitar is challenging enough, without having attempted hard with a hard instrument to play. So that is why I suggest that you have your guitar properly set up by a best guitar tech in your area. Is this really your guitar like it could be played. A job set-up is something that every guitar tech at your local music store will be able to do for a nominal fee is usually less than $ 50
A general set-up tasks include:
1. Adjusting the Truss Rod.
The truss rod is the metal reinforcement that runs length of the guitar's neck (inside the neck.) It needs routine adjustment to make the action (the distance between the strings and the frets) as low as possible without buzzing. This rod adjusts the 'bend' in the neck forward or backward and should only be adjusted by someone who is experienced. Just the right amount of tension and your guitar plays 'like butter.' Too much, and your guitar ends up in splinters at your feet.
2. Adjusting the Bridge and the Nut.
The bridge (by the tail piece) and nut (by the tuning pegs) are the two places that the strings make contact with the guitar. Sometimes these need to be filed or sanded down to get the proper action on a guitar. A good tech will check this and make adjustments as needed. On some guitars (mostly electrics), the bridge will be adjustable using tools and your tech will know how to do it.
3. Changing the Strings.
Along with all the adjustments, a set-up will include a new set of strings, properly stretched out and ready to play.
When all is said and done, a proper set-up job will make your guitar as easy to play as possible, so that you can get back to making music.
A general set-up tasks include:
1. Adjusting the Truss Rod.
The truss rod is the metal reinforcement that runs length of the guitar's neck (inside the neck.) It needs routine adjustment to make the action (the distance between the strings and the frets) as low as possible without buzzing. This rod adjusts the 'bend' in the neck forward or backward and should only be adjusted by someone who is experienced. Just the right amount of tension and your guitar plays 'like butter.' Too much, and your guitar ends up in splinters at your feet.
2. Adjusting the Bridge and the Nut.
The bridge (by the tail piece) and nut (by the tuning pegs) are the two places that the strings make contact with the guitar. Sometimes these need to be filed or sanded down to get the proper action on a guitar. A good tech will check this and make adjustments as needed. On some guitars (mostly electrics), the bridge will be adjustable using tools and your tech will know how to do it.
3. Changing the Strings.
Along with all the adjustments, a set-up will include a new set of strings, properly stretched out and ready to play.
When all is said and done, a proper set-up job will make your guitar as easy to play as possible, so that you can get back to making music.
No comments:
Post a Comment